Your power curve,
fresh and after the work.
Intervals.icu draws your power curve: for every duration, the highest average power you have ridden for that long. It is the chart behind two questions riders ask all the time. Is my five minutes up on last year? And how much of my power is left once I have already done a lot of work? Both need more than one look at the same data: two date ranges side by side, or a fresh curve beside a fatigued one.
Your assistant can read both through IntervalSync, one question each. get_power_curves returns your highest power at standard durations over any dates, and can read a second range beside it. get_power_durability returns that power fresh and after a set amount of work. Both only read: neither changes anything in Intervals.icu, so there is nothing to confirm. What needs care is what the numbers are, and that is most of this article.
What the power curve question returns
Name a date range, and a sport if it is not Ride. For each duration your assistant gets the watts, the ride they came from and the day.
- The durations. Unless you name others: 5, 15, 30 and 60 seconds, then 2, 5, 10, 20, 30 and 60 minutes. Any duration from 1 second to 24 hours can be asked for, up to 20 at a time. A curve has no point at every second, so where there is none at the duration you asked for, the nearest point within five percent answers for it, and the answer says which duration it read.
- The dates. With none, the 90 days ending today. A start date alone counts to today; an end date alone, the 90 days ending then.
- The ride behind each number. Each best names the ride and the day it came from. Watts per kilogram is the range's own best, which can come from another ride, at another weight, than the best watts.
- The models. Critical power, W′, Pmax and FTP as Intervals.icu fits them to that range's curve, in watts (W′ in joules), and the model Intervals.icu currently uses for %MMP steps in your workouts. A value Intervals.icu leaves empty is left out, not shown as zero. If Intervals.icu cannot give the workout model, the curves are still given and the answer says so.
This season against last
Give the second range as a start and an end date and both come back in one call, with the change at each duration. Give both dates or neither: half a comparison is refused before anything is read. The change is the first range minus the range it is compared with, in watts and as a percentage of the compared one, so a positive figure means the range you asked about is higher. The compared range is read at exactly the duration the first one was, so a change never sets one length of effort against another.
Compare my power curve from 1 June to 30 September 2026 with the same dates in 2025. Give me the change at each duration in watts and percent, and name the ride and day each best came from. Then read my durability for the 2026 dates at 5 and 20 minutes, fresh and after each of my kJ thresholds. Say which thresholds are set, whether either range had no power, and which numbers come from a power model.
Durability: power fresh and after the work
Durability is how much of your power is left after a lot of work; some riders call it fatigue resistance. Intervals.icu computes fatigued power curves: the highest power at each duration that came after you had done a set amount of work in the ride. Beside the fresh curve at the same duration, the gap is the drop.
- The amounts of work are in your settings, not in your question. They are the two kilojoule thresholds in your Intervals.icu sport settings, after_kj0 and after_kj1. Your assistant reads them and cannot change them: the tool that edits sport settings changes FTP, heart rate and pace thresholds and zones, not these. If neither is set, the answer says so and gives no numbers. Ask for your sport settings to see what is set.
- One ride, or a range. Give an activity, or a start and an end date for the highest across every ride in the range. With neither, it covers the last 365 days. An activity together with dates is refused before anything is read.
- What comes back. At each duration (5 seconds, then 1, 5, 20 and 60 minutes, unless you name others): the fresh watts, the watts after each threshold at that same duration, and the drop in percent. Ask for the full curve and each curve comes back thinned evenly to 250 points, and says so.
- A threshold not reached. A ride, or a range, that never got to a threshold is reported as such, not as a drop of 100 percent. Where no effort of that length came after the threshold, the value is empty, not zero.
What the numbers can and cannot tell you
- A curve is only as good as the power data. These two tools read Intervals.icu's curves as they stand. They do not check the power stream behind a best, as the interval tools do, and a stuck or spiking meter can sit at the top of a curve. Each best names its ride and day, so a number that looks too good can be traced: ask your assistant to open that ride with its data quality check on. Is this number real, or is my power meter lying? shows how faults hide and what a check can catch.
- A best effort is not a test. A best is the highest average power your data holds for that duration in that range. If you never rode twenty minutes flat out in it, the curve shows the twenty minutes you did ride. A longer range also has more rides to take a best from, so compare ranges of similar length; Decoupling and block length shows how a comparison goes wrong when its two sides differ in length.
- Durability depends on which rides are in the range. For one ride, the fresh power and the power after the work are both from that ride. For a range, each is the highest across the whole range and names its own ride, so the two can come from different rides. A range with no long ride may never reach a threshold; the answer then says that none did.
- Indoor and outdoor rides can share a curve. Intervals.icu builds curves per sport settings group, not per activity type. Where one group holds both Ride and VirtualRide, either gives the same curve, trainer rides and outdoor rides together. Ask for your sport settings to see which types each group holds.
- A range with no power has no curve. That is an answer, not an error: it says which range has none, and in a comparison the other range is still given. A wider range, or a look at whether the rides recorded power, shows whether there is any.
- Critical power, W′ and Pmax are a model's estimate. Intervals.icu fits them to that range's curve; they are not measured, and another range gives another fit.
- It refuses before it guesses. If the curves in Intervals.icu's answer cannot be told apart, or a figure after the work comes out above the fresh one, which it cannot be, no numbers are given.
Before you ask
Both are read tools, on every plan. The curves are read under the Activity permission you gave IntervalSync when you signed in with Intervals.icu; durability also reads your sport settings, so it needs the Settings permission as well. On Free, after the 14-day trial, each tool reads from Intervals.icu once a day, and a comparison of two ranges is one call; pricing sets out each plan's limit. To connect your assistant, follow the ChatGPT, Claude, Gemini or Grok guide.
Every tool your assistant can use · More prompts · The same interval, eight weeks apart · All articles · Connect your training