New · 22 October 2026

Bike maintenance,
kept by your assistant.

Every part of a bike wears by the kilometre and the hour. A chain stretches, brake pads thin, tyres square off, a fork's oil breaks down. Intervals.icu already counts the distance and riding time on every piece of gear you give it, and it can remind you when a part is due. Setting that up has meant a settings page, a form for each part, and remembering to come back after the work is done.

Now your assistant does it in the conversation you are already having about your training. Ask how far your chain has done. Ask it to remind you to replace it at 3,000 km. Tell it the new one is on, and it starts the count again. Everything it changes is shown to you first, and nothing happens until you confirm it.

Why it is worth keeping

Maintenance on a schedule costs less than maintenance after something fails. The clearest case is the chain: a chain replaced before it has stretched too far is the cheapest part of the drivetrain, and one left on wears the cassette and chainrings with it, so the bill becomes three parts instead of one. Brake pads and tyres are the same story told in safety rather than money. And a service is easier to plan in a quiet week than to find out about the week of a race.

The hard part is not knowing what to do. It is knowing when. Kilometres pile up across outdoor rides and trainer sessions, on two or three bikes, and nobody keeps that tally in their head. Intervals.icu keeps it from your activities; your assistant now reads it and sets the reminders for you.

What your assistant can do now

Reading your gear works on every plan. Adding and changing it comes with the full-access trial and with Pro, as the other changes your assistant can make in Intervals.icu do.

Six ways to use it

1. How far has this part done?

The quickest question, and the one that starts most of the others. Your assistant lists your gear in kilometres and hours, so the answer is in the units you think in.

Ask
How many kilometres are on the chain of my road bike, and how close is it to the replacement reminder?

2. Set up a new bike, with its reminders

A new bike is the moment to put its maintenance on a schedule, once, instead of remembering it part by part. Describe what you want; your assistant shows you the gear and each reminder before it adds anything.

Ask
I've got a new gravel bike. Add it to my gear, and set reminders to replace the chain every 3,000 km, check the brake pads every 1,500 km, and book a full service every 12 months.

3. The part is replaced: start the count again

This is the step that usually gets forgotten, and why reminders end up ignored: a reminder that was never reset fires on a part that is brand new. Tell your assistant the work is done and it resets the reminder from that day. What the old part had done is returned to you, so the record of its life is not lost.

Ask
I put a new chain on the road bike today. Reset the chain reminder.

4. What is due before the race?

The week of an important event is the wrong time to find a worn cable or pads at the end of their life. Ask what is close to due on the bike you will race, and you have a list to take to the workshop, or to work through yourself, in time.

Ask
My A race is in three weeks. Is anything on my race bike due, or within 20% of due, before then?

5. Hours, not kilometres, for the parts that wear by time

Suspension wears by hours ridden, and a trainer bike's kilometres say little about what its drivetrain has been through. A reminder can count hours of riding instead, or rides, or days, whichever matches the part.

Ask
Set a reminder on my mountain bike to service the fork every 50 hours of riding, and one on the trainer bike to replace its chain every 100 rides.

6. Swapping wheels and tyres between bikes

Race wheels, winter tyres, a second wheelset with a trainer cassette: parts that move between bikes are where a tally goes wrong. Fitted as a component, each keeps its own distance, whichever bike it is on.

Ask
Add my race wheelset as a component, fit it to the road bike in place of the training wheels, and remind me to check the tubeless sealant every 60 days.

How a change is made

What it cannot do

Turning it on

Gear sits under the Settings permission you give IntervalSync when you sign in with Intervals.icu. A connection made before settings changes were added has that permission read-only. If your assistant says it needs the Settings permission with write access, use Refresh Intervals permissions on the AI Vendor Connections page of your IntervalSync portal once, and approve it on Intervals.icu's screen. An assistant that connected before this release may also need its connector reconnected once to see the new tools.


Every tool your assistant can use · More prompts · All articles · Connect your training